Your Clean Drinking Water Guide: How to Purify Tap Water

Water is essential, but unfortunately, the safety of your water can vary depending on where you live. This is problematic because contaminated water can lead to a bunch of health concerns

If you rely on tap water as your main drinking source, you may want to consider purifying it. The process of purifying water isn’t as hard as you may think. To help show you, here is your guide for how to purify tap water. 

Boil Your Water 

One way to clean your water is to boil it. This is one of the easiest ways to kill bacteria, viruses, and parasites that can make you sick. The safest way to ensure everything is killed is to boil the water for approximately two minutes. 

You may notice a slightly different taste to boiled water. You can improve the taste by pouring it from one container to another and then letting it sit for a couple of hours. 

It’s recommended that you make a lot at once because heating and cooling the water can take time. 

Use Disinfectants 

Another way you can clean your water is by using disinfectants. Though this solution is effective, you need to be careful in your measurements. 

Chlorine bleach is the disinfectant recommended by the CDC to purify your water.

Most chlorine bleach contains a 5-9% concentration for sodium hypochlorite. Using a medicine dropper, add two drops of bleach for every 1 quart of water you have. Add 8 drops of bleach for a full gallon of water and 40 drops for 5 gallons of water. 

If your bleach only has a 1% concentration of sodium hypochlorite, use 10 drops of bleach for a quart of water and 40 drops for 1 gallon of water. 

Water Filters 

Water filters are great for cleaning water and killing disease-causing parasites. You can buy a water purifier or filter to pour your tap water into before drinking it. 

You can also buy water filtered water bottles. Some of these bottles allow you to drink water straight from rivers and creeks because of their filtration technology.

Be sure to read reviews and do your research beforehand to ensure you’re buying a legitimate product that will keep you safe. 

You can also buy a water filtration system for your home. Feel free to check it out!

UV Light 

A lesser-known way to purify water is using ultraviolet light. Keep in mind that this method isn’t perfect because it can only kill bacteria, not viruses or parasites. However, you can always combine it with other water purifying methods. 

You can do it by filtering the water first, so it’s not cloudy. Then, drop an ultraviolent flashlight into your water and swish it around. Keep the flashlight in for a while to ensure it has time to kill all the bacteria. 

Now You Know How to Purify Tap Water 

These are the most basic ways for how to purify tap water. None of these solutions are difficult, and they won’t cost you much.

Even if you think your tap water is safe, it never hurts to purify it anyway. It’s always better to be safe than sorry, especially considering how harmful contaminated water can be. So, why not give it a try? 

And if you want to learn about more helpful tips, be sure to check out the rest of our blog. We have a ton of other articles related to your health that you’re sure to love!

Leave a Reply