How to waterproof your boots with Anhydrous Lanolin

Leather boots have been a must-have fashion accessory for decades. When you find the perfect pair, chances are you want them to last. The problem is, it’s very easy for leather products to wear out if you don’t give them the care they need.

There’s plenty of leather care products available at the supermarket today. Unfortunately, many of these products on the shelves are full of added chemicals and preservatives. If you’re looking for a simpler and more natural alternative to these products, try anhydrous lanolin.

What is anhydrous lanolin?

Pure anhydrous lanolin is an exceptional, natural raw product that many people enjoy using for its cosmetic benefits. Lanolin is well-known for being a wool wax with emollient properties that soothe dry, rough or cracked skin, rashes and abrasions.

The yellow, greasy substance is also excellent for other purposes and can be effectively used as a waterproofing wax that is organic and chemical-free. You can even waterproof your boots by applying anhydrous lanolin. It’s simple to do and inexpensive. Waterproofing your boots can extend the life of your leather footwear for years to come.

We all have a favourite pair of boots, but let’s face it. The environment can do a number on even our most rugged footwear. There’s nothing worse than watching your boots get damaged from penetrating moisture. You end up with cold, wet socks and feet.

Why should I waterproof my boots?

Waterproofing your boots every so often is essential to do, but you want to make sure your boots are clean before applying nature’s water-proofing wax. Grime can interrupt the absorption, so take a brush and scrape off any dirt and debris.

If grime is stuck to the soles, place them in about an inch or so of water to help loosen the muck. Then, allow the boots to air-dry but not completely. Dampness is good for opening the pores of the leather.

Anhydrous lanolin is amazing at getting into the nooks and crannies of your boots’ leather. What the product does is build a protective seal on the boots to make them resistant to water and moisture.

The word “anhydrous” is used to describe a substance without water.

Method

  • Step 1:

Take an old, lint-free cloth like a tee-shirt, for example, and begin dipping it into the lanolin and applying it to your boots. Rub the product in, especially at vulnerable seams and creases, and apply it all over the boots.

Avoid applying the lanolin to the soles of your boots. Lanolin is easy to work with and has a soft texture, so you don’t have to melt it ahead of time before using it.

  • Step 2:

Next, you can place your boots in front of a heater to help them better absorb the lanolin. Or you could place the boots in front of a fan to speed up the drying process.

  • Step 3:

Now it’s time to buff up your boots with a soft cloth. Anhydrous lanolin produces a wonderful, natural sheen that leaves your footwear looking supple and new.

Now, you’re ready to head outdoors for your next adventure in all kinds of challenging terrain!

Visit www.n-essentials.com.au and discover a vast range of natural, raw ingredients along with great tips for all of your skincare and household needs.

Leave a Reply